PHYSICO – MECHANICAL MEASUREMENT LABORATORY

Physico – Mechanical Measurement Laboratory (Technical Division 3 – K3) provides verification, calibration and measuring equipment testing services in the following physico – mechanical fields:
1. Weight
2. Force
3. Pressure
4. Volume – Flow
5. Length
Our systems and devices satisfy requirements of measurement traceability of national references and are compatible with the international standards. The environmental conditions are always maintained to conform to strict requirements of each metrology procedure.
In addition, we have been supplying various additional services for the customers such as on-site surveys and testing, equipment delivery upon request, expert training, consulting and repairing…

DECISIONS, DESIGNATIONS
1. Decision No. 60/2014/QĐ-VPCNCL dated 25/02/2014 issued by Bureau of Accreditation (BoA) on the accreditation of the laboratory to conform with the requirements of ISO/IEC 17025:2005; No.: VILAS 024.
2. Certificate No. 1407/TĐC-ĐL dated 30/06/2016 issued by Directorate for Standards, Metrology and Quality, providing services of verification, calibration, testing of measuring equipment, measurement standards; No.: ĐK 02.
3. Designation No. 1232/QĐ-TĐC dated 30/06/2016 issued by Directorate for Standards, Metrology and Quality as the organization performing verification, calibration, testing of measurement devices, metrology standards.
4. Decision No. 2290/QĐ-TĐC dated 12/12/2016 issued by Directorate for Standards, Metrology and Quality on certifying measurement standards used to verify the measuring equipment.

Main device list (click to see more)
N0EquipmentTechnical SpecificationCodeManufacturer

(1)(2)(3)(4)(5)
IWeight
1Comparator AX 1622 g/0,001 mgTB/KT2-K3/K.S01Switzerland
2Comparator XP 205220 g/0,01 mgTB/KT2-K3/K.S02Switzerland
3Comparator CC310300 g/0,01 mgTB/KT2-K3/K.S03Germany
4Comparator SBC 22210 g/0,1 mgTB/KT2-K3/K.S04Germany
5Comparator AX 10041109 g/0,1 mgTB/KT2-K3/K.S05Switzerland
6Comparator PR 100310 kg/1 mgTB/KT2-K3/K.S06Switzerland
7Comparator KA30-3/P30 kg/2 mgTB/KT2-K3/K.S07Switzerland
8Comparator CCE 60K264 kg/10 mgTB/KT2-K3/K.S08Switzerland
9Weights of classes E2(1¸500) mgTB/KT2-K3/K.S09Switzerland
10Weights of classes E2(1¸500) gTB/KT2-K3/K.S10Switzerland
11Weights of classes E2(1¸20) kgTB/KT2-K3/K.S12Switzerland
12Weights of classes F11 mg ¸ 10 kgTB/KT2-K3/K.W01Switzerland
13Weights of classes F1(1¸ 500) gTB/KT2-K3/K.W02Vietnam
14Weights of classes F1(1 ¸ 20) kgTB/KT2-K3/K.W03Vietnam
15Weights of classes F1(1  ¸ 500) gTB/KT2-K3/K.W04Poland
16Weights of classes F2(1  ¸ 200) gTB/KT2-K3/K.W05USSR
17Weights of classes F2(1 ¸ 20) kgTB/KT2-K3/K.W07Vietnam
18Weights of classes M1(1 ¸ 20) kgTB/KT2-K3/K.W08Germany
19Weights of classes M1(5,10,20) kgTB/KT2-K3/K.W09Vietnam
20Weights of classes M1500 kg/weightTB/KT2-K3/K.W10Vietnam
IIForce
1Loadcell SST 201 KNC200 kN/0,24TB/KT2-K3/F.W01USA
2Loadcell SST 501 KNC500 kN/0,24TB/KT2-K3/F.W02USA
3Loadcell SST 102 KNC1000 kN/0,24TB/KT2-K3/F.W03USA
4Loadcell SST 202 KNC2000 kN/0,24TB/KT2-K3/F.W04USA
5Loadcell SST 302 KNC3000 kN/0,24TB/KT2-K3/F.W05USA
6Loadcell SST 502 KNC5000 kN/0,24TB/KT2-K3/F.W06USA
7Loadcell LRCN 7301000 kN/0,24TB/KT2-K3/F.W07USA
8Loadcell LRCN 730500 kN/0,24TB/KT2-K3/F.W08USA
9Loadcell LRCN 71050 kN/0,24TB/KT2-K3/F.W09USA
10Loadcell LRCN 71020 kN/0,24TB/KT2-K3/F.W10USA
11Loadcell LRCN 71010 kN/0,24TB/KT2-K3/F.W11USA
12Loadcell LRCN 7105 kN/0,24TB/KT2-K3/F.W12USA
13Loadcell LRCN 7102 kN/0,24TB/KT2-K3/F.W13USA
14Loadcell LRCN 7101 kN/0,24TB/KT2-K3/F.W14USA
15Mechanical Loadcell2000 kN/0,24TB/KT2-K3/F.W15Germany
16Tensile – compress testing machines2000 kNTB/KT4USA
IIIPressure
1Pressure balances CPB 5000(2¸1000)bar/ 0,015TB/KT2-K3/A.S05Germany
2Pressure balances SI-9000 35 bar(1¸35) bar/ 0,015TB/KT2-K3/A.SO3UK
3Pressure balances SI-9000 75 bar(2¸75) bar/ 0,015TB/KT2-K3/A.SO2UK
4Pressure balances SI-9000 350 bar(5¸350) bar/ 0,015TB/KT2-K3/A.SO1UK
5Pressure balances SI-9000 700 bar(10¸700) bar/ 0,015TB/KT2-K3/A.SO4UK
6Digital pressure gauge DPI 610(-1¸20) bar/ 0,025TB/KT2-K3/A.S06USA
7Pressure sensor with DPI 610(-70¸70) mbar/ 0,025TB/KT2-K3/A.S06-1USA
8Pressure sensor with DPI 610(0¸700) mbar/ 0,025TB/KT2-K3/A.S06-2USA
9Pressure sensor with DPI 610(0¸700) mbar/ 0,025TB/KT2-K3/A.S06-3USA
10Pressure sensor with DPI 610(0¸70) bar/ 0,025TB/KT2-K3/A.S06-4USA
11Pressure sensor with DPI 610(0¸350) bar/ 0,025TB/KT2-K3/A.S06-5USA
12Pressure sensor with DPI 610(0¸700) bar/ 0,025TB/KT2-K3/A.S06-6USA
13Digital pressure gauge DPI 610(-1¸20)bar/ 0,025TB/KT2-K3/A.S07USA
14Digital pressure gauge PC6-0020-Pro(-1¸20)bar/

0,025

TB/KT2-K3/A.W03UK
15Digital pressure gauge PC6-1000-C(0¸1000)bar/

0,025

TB/KT2-K3/A.W02UK
16Pressure sensor with PC6(0¸40)bar/

0,025

TB/KT2-K3/A.W02-1UK
17Pressure sensor with PC6(0¸200)bar/

0,025

TB/KT2-K3/A.W02-2UK
18Pressure sensor with PC6(0¸350)bar/

0,025

TB/KT2-K3/A.W02-3UK
19Pressure sensor with PC6(0¸700)bar/

0,025

TB/KT2-K3/A.W02-4UK
20Pressure sensor with PC6(0 ¸1000)bar/

0,025

TB/KT2-K3/A.W02-5UK
IVVolume – flow
Standard vessel class II(250,500,1000,2000)mL/0,1TB/KT2-K3/D.S01Quatest3
Standard vessel class I5L/0,02TB/KT2-K3/D.S02VMI
Standard vessel class I50L/0,02TB/KT2-K3/D.S03VMI
Standard vessel class I100L/0,02TB/KT2-K3/D.S04VMI
Standard vessel class I200L/0,02TB/KT2-K3/D.S05VMI
Standard vessel class II2L/0,1TB/KT2-K3/D.W01VMI
Standard vessel class II5L/0,1TB/KT2-K3/D.W02VMI
Standard vessel class II10L/0,1TB/KT2-K3/D.W03VMI
Standard vessel class II20L/0,1TB/KT2-K3/D.W04VMI
Standard vessel class II50L/0,1TB/KT2-K3/D.W05VMI
Standard vessel class II100L/0,1TB/KT2-K3/D.W06VMI
Standard vessel class II200L/0,1TB/KT2-K3/D.W07VMI
Standard vessel class II3000L/0,1TB/KT2-K3/D.W08VMI
VLength
1Standard line scales1000 mm/1 mmTB/KT2-K3/L.W01Germany
2Gauge Block(0,5¸100) mmTB/KT2-K3/L.W02Germany
3Panme(0¸25) mm 0.002mmTB/KT2-K3/LW03Russia
4Dial indicator calibration device1 mmTB/KT2-K3/LW04Germany
5Magnifying glass0,1 mmTB/KT2-K3/LW05Japan
TTName of measuring equipment/ deviceTechnical specificationPrecedure Note
IWEIGHT
IV.1Platform scalesto 500 kg, Class: 3ĐLVN 14:2009 / KT2.K3.HC-02/KVerification/ Calibration
to 1.000 kg, Class: 3
to 5.000 kg, Class: 3
IV.2Bench weight scalesto 20 kg, Class: 3ĐLVN 15:2009 / KT2.K3.HC-02/KVerification/ Calibration
> 20 kg, Class: 3
IV.3Spring dial scales(0 ÷ 200) kg, Class: 4ĐLVN 30:2009Verification
IV.4Crane scalesClass: 3KT2.K3.HC-03/KCalibration
IV.5Analytical balancesClass: 1ĐLVN 16:2009 / KT2.K3.HC-01/KVerification/ Calibration
IV.6Technical balancesClass: 2
IV.7WeighbridgesTo 80 tonsĐLVN 13:2009 / KT2.K3.HC-02/KVerification/ Calibration
> 80 tonsVerification
IV.8Weighbridges testingto 80 tonsĐLVN 100:2009Testing
 > 80 tons
IV.9Platform scales testingto 10 tonsĐLVN 100:2009Testing
IV.10Bench weight scales testingto 60 kgĐLVN 100:2009Testing
IV.11Belt weighersto 60 tons/hĐLVN 03:2009 / KT2.K3.HC-04/KVerification/ Calibration
IV.12Weighing system of concrete batching plantto  80 m3/hKT2.K3.HC-05/KCalibration
(80 ÷ 120) m3/h
IV.13Weights of class F1(1 ÷ 500) mg, Class: F1ĐLVN 50:2009 / ĐLVN 99:2002Verification/ Calibration
(1 ÷ 500) g, Class: F1
(1 ÷ 20) kg, Class: F1
IV.14Weights of class F2(1 ÷ 500) mg, Class: F2ĐLVN 47:2009 / ĐLVN 99:2002Verification/ Calibration
(1 ÷ 500) g, Class: F2
IV.15Weights of class M1, M2(1 ÷ 500) g, Class: M1
(1 ÷ 20) kg, Class: M1, M2
500 kg, Class: M1
IIFORCE
I.1Tensile – compress testing machinesto 30 tonsĐLVN 109:2002Calibration
(30 ÷ 200) tons
I.2Force measuring devices to 10 tonsĐLVN 108:2002Calibration
to 20 tons
I.3Torque  measuring devicesto 1500 N.mĐLVN 110:2002Calibration
I.4Hydraulic lift jacks for measure Eto 20 tonsĐLVN 108:2002Calibration
I.5Hydraulic push off jacks(25 ÷ 50) tonsĐLVN 108:2002Calibration
 

I.6

Hydraulic cable pull jacksto 250 tonsĐLVN 108:2002Calibration
to 500 tons
I.7Mortar mixersKT2.K3.TN-03/LTesting
I.8Ballast modeling machineKT2.K3.TN-04/LTesting
I.9Pile presses machinesTo 500 tonsĐLVN 108:2002Calibration
I.10Torque wrenches\ĐLVN 110:2002Calibration
I.11Concrete strength testing equipment(10 ÷ 100) RĐLVN 150:2004Calibration
I.12CBR/Marshall Machines(30 ÷ 100 ) kNĐLVN 108:2002Calibration
I.13Soil cutting machineto 140 daNĐLVN 108:2002Calibration
I.14Trilogy machines(12.5 ÷ 1600) kPaĐLVN 108:2002Calibration
I.15First machines(12.5 ÷ 800) kPaĐLVN 108:2002Calibration
I.16Rubber hardness measuring machines0 ÷ 100KT2.K3.HC-05/FCalibration
I.17Steel hardness measuring machinesto 60 HRCKT2.K3.HC-06/FCalibration
IIIPRESSURE
III.1Pressure gauges for Oxygen (Air) (0 ÷ 1.000) bar, Accuracy 1 to 6%ĐLVN 08:2011 / ĐLVN 76:2001Verification/ Calibration
III.2Pressure gauges for liquid(0 ÷ 600) bar, Accuracy 1 to 6%ĐLVN 08:2011 / ĐLVN 76:2001Verification/ Calibration
III.3Pressure gauges for Oxygen (Air)(0 ÷ 1.000) bar, Accuracy 0,16 to 0,6%ĐLVN 54:2009 /
ĐLVN 76:2001
Verification/ Calibration
III.4Pressure gauges for liquid(0 ÷ 1.000) bar, Accuracy 0,16 to 0,6%ĐLVN 54:2009 / ĐLVN 76:2001Verification/ Calibration
III.5Aneroid pressure gauges(0 ÷ 10) bar, Accuracy 1 to 6%ĐLVN 08:2004 / ĐLVN 76:2001Verification/ Calibration
III.6Water column pressure gauges(0 ÷ 1,5) bar, Accuracy 1 to 2,5%ĐLVN 08:2011 / ĐLVN 76:2001Verification/ Calibration
III.7Mercury column pressure gauges(0 ÷ 1) bar, Accuracy 1 to 2,5%ĐLVN 08:2011 / ĐLVN 76:2001Verification/ Calibration
III.8Pressure – vacuum gauges(-1 ÷ 1) bar, Accuracy 1 to 6%ĐLVN 08:2011 / ĐLVN 76:2001Verification/ Calibration
III.9Micro pressure gaugesAccuracy 1%; 2%ĐLVN 08:2011 /
KT2.K3.HC-01/A
Verification/ Calibration
III.10Spring and mercury Sphygmomanometers(0 ÷ 300) mmHg, Accuracy 1 to 2,5%ĐLVN 09:2011Verification
III.11Digital standard Sphygmomanometers(0 ÷ 300) mmHgĐLVN 54:2009Verification/ Calibration
III.12Relief and safety Valves(0 ÷ 25) barKT2.K3.TN-01/ATesting
III.13Pressure Transducer and TransmitterTo 1000 barĐLVN 112:2002Calibration
III.14Pressure switchesTo 1000 barĐLVN 113:2004Calibration
III.15Digital Pressure gaugesTo 1000 bar, Accuracy 0,05 to 0,6%ĐLVN 163:2013 / ĐLVN 76:2001Verification/ Calibration
IVVOLUME
V.1Casks(0 ÷ 20) L, Class: 0,5KT2.K3.TN-01/DTesting
V.2Barrels(0 ÷ 20) L, Class: 0,5KT2.K3.TN-02/DTesting
V.3Barrelsto 50 L, Class: 0,5KT2.K3.TN-03/DTesting
to 100 L, Class: 0,5
> 100 L, Class: 0,5
V.4Barrelsto 50 L, Class: 0,5KT2.K3.TN-04/DTesting
to 100 L, Class: 0,5
> 100 L, Class: 0,5
V.5Horizontal Cylindrical tanksto 10 m3ĐLVN 29:2008Verification
to 20 m3
> 20 m3
V.6Vertical Cylindrical tanksto 500 m3ĐLVN 28:2008Verification
to 1000 m3
> 1000 m3
V.7Fuel dispensersClass: 0,5ĐLVN 10:2013Verification
V.8Flow meters for oils and oil productsDN to 50 mm, Class: 0,5ĐLVN 22:2014 / ĐLVN 94:2009Verification/ Calibration
DN to 100mm, Class: 0,5
DN to 150 mm, Class: 0,5
V.9Standard vessel class 2to 20 LĐLVN 57:2009Verification
50 L
100 L
200 L
500 L
1000 L
2000 L
5000 L
V.10Diaphragm gas meterType G1.6ĐLVN 155:2005Verification
V.11Meter for cold potable waterDN to 100 mmĐLVN 17:2009 / KT2.K3.HC-01/D / KT2.K3.HC-02/DVerification/ Calibration
DN to 150 mm
DN to 250 mm
DN to 300 mm
VLENGHT
II.1Micrometer calipers(0 ÷ 25) mmKT2.K3.HC-02/LCalibration
II.2Vernier calipersto 300 mmKT2.K3.HC-01/LCalibration
 (300 ÷ 600) mm
II.3Measuring tapesto 10 mKT2.K3.HC-03/LCalibration
(10 ÷ 50) m
II.4Dial indicators(0 ÷ 50) mmKT2.K3.HC-05/LCalibration
II.5BENKELMAN rodScale 2/1KT2.K3.TN-05/LTesting
II.6Commercial ruleto 1 mKT2.K3.HC-04/LCalibration
II.7Taximet\ĐLVN 01:2010Verification
II.8Asphalt needleto 50 mmKT2.K3.TN-01/LTesting
II.9VIKA Toolsto 40 mm
Weight: 300 ± 1 g
KT2.K3.TN-02/LTesting
II.10Test sieves to 100 mmKT2.K3.TN-07/LTesting
II.11Thickness measuring devices\KT2.K3.HC-06/LCalibration
II.12Innermicrometers\ĐLVN 149:2004Calibration
II.13Counting meters\KT2.K3.HC-03/LCalibration
II.14Distance measuring devices\KT2.K3.HC-03/LCalibration

QUALITY ASSIURENCE AND TESTING CENTRE 2 – Technical Division 3
Điện thoại: 0236.3831049;
Fax: 0236.3910064;
Email: k3@quatest2.com.vn


Call Now Button