Currently, the most common material for the construction of walls is brick. It has certain advantages, such as fire resistance, strength and durability. The best option for private construction is masonry, the thickness of which is one or one and a half bricks. The process of laying brick walls has its own rules that must be taken into account when working.
Laying decorative stone can be divided into several stages, this will help facilitate the work.
Preparatory work
Stages of the construction of stone walls.
1. The most important process in the work is the preparation of an installation plan, for this the formula is used: both the length and height of the future structure should correspond to the number of whole stones. Thus, you do not have to break the stones and adjust them to the necessary standards. 2. When the plan is drawn up, you can start marking on the site. At the same time, the marking of the outer wall is performed first, and only then the inner one. For the accuracy of the work carried out, it is recommended to check the values of the diagonals several times, they should be equal. Then, after every two or three meters, you need to lay a stock of material, about ten pieces and a special container for the solution. 3. Masonry begins from the outer corners of the structure. To make the row even, you can use a stretched thread. Whether the corner stones are installed correctly, check with the help of the level.
Laying stone with your own hands
4. In the process of erecting stone walls, it is very important to properly perform masonry. Two strips of mortar are applied to the upper surface of the stone, which is previously moistened with water. The width of these strips is about sixty millimeters. After that, the stone is taken by hand and rotated ninety degrees, and very tightly pressed against the previously laid layer. With the help of a trowel, you can remove the solution protruding on the front side of the wall. If the walls are properly laid, the thickness of the vertical seams will be ten to fifteen millimeters, and the thickness of the horizontal ones about thirteen millimeters. 5. When laying stone walls, it is necessary to perform the dressing of the rows. Masonry is made of stone in such a way that the vertical seams shift with each row to the floor of the stone. And all the joints between natural stones must necessarily overlap with a whole stone. During the construction of a two-storey house, it is necessary to take care of the creation of an armory.
To do this, the formwork is constructed at the required height and a reinforced frame is made. After that, the formwork is poured with concrete by about two hundred millimeters. Thus, you can build walls of stone yourself, and save the family budget at the same time. Mənə ədalətsizlik kimi görünür ki, hər cür psevdo bukmeker kontorları ölkəmizdəki bukmeker kontorundan daha yaxşı tanınır motsbet Sonuç olarak, sitede sunulan şartlar online ticaret dünyasında en iyi fiyatlandırma seçenekleri arasında yer almaktadır ve bu bahis şirketini herkese tavsiye ediyorum